INTAKE AIR TEMPERATURE SENSOR INSTALLATION

PROCEDURE

  1. INSTALL INLET AIR TEMPERATURE SENSOR

    1. Install a new gasket to the intake air temperature sensor.

    2. A210870C01

      *a

      22 mm ball joint lock nut wrench

      Using a 22 mm ball joint lock nut wrench, install the inlet air temperature sensor.

      34.3 N*m

      350 kgf*cm

      25 ft.*lbf

      Note:

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench.

      Click hereClick here

    3. Connect the connector from the inlet air temperature sensor.

  2. INSTALL NO. 1 ENGINE UNDER COVER