CAMSHAFT OIL CONTROL VALVE(for Exhaust Side) INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

   
   

   1. Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve assembly.

      Note

      Do not damage the O-ring when installing.

      Tech Tips

      An O-ring is already installed in a new camshaft timing oil control valve assembly. Therefore, the O-ring only needs to be coated with engine oil when the camshaft timing oil control valve assembly is replaced with a new one.

   2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • Replace with a new part if it is dropped or if it receives a strong impact.

      • Make sure that the O-ring is not cracked or jammed when installing.

   3. Connect the camshaft timing oil control valve assembly connector.

   4. Connect the wire harness to the cylinder head cover sub-assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. INSPECT FOR OIL LEAK

   Click here

3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here