GENERATOR(for 100A Type) INSTALLATION

PROCEDURE

  1. INSTALL GENERATOR ASSEMBLY

    1. Install the wire harness clamp bracket with the bolt.

      8.4 N*m

      86 kgf*cm

      74 in.*lbf

    2. A282536

      Temporarily install the generator assembly with the bolt.

    3. A282535

      Temporarily install the adjusting bar with the 2 bolts.

    4. A258120

      Connect the connector and wire harness clamp.

    5. Connect the wire harness to terminal B and install the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

    6. Install the terminal cap.

    7. A285080

      Tighten the bolt.

      25 N*m

      255 kgf*cm

      18 ft.*lbf

  2. INSTALL V-RIBBED BELT

    Click here

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick here