STEERING GEAR / LINKAGE TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Wire harness clamp bracket set bolt
9.0 N*m
92 kgf*cm
80 in.*lbf
Rack and pinion power steering gear assembly set bolts (for 2WD)
55 N*m
561 kgf*cm
41 ft.*lbf
Rack and pinion power steering gear assembly set bolts (for AWD)
80 N*m
816 kgf*cm
59 ft.*lbf
Tie rod assembly x Steering knuckle
60 N*m
612 kgf*cm
44 ft.*lbf
Steering sliding with shaft yoke sub-assembly set bolts (for 2WD) with SST and union nut wrench
18.2 N*m
186 kgf*cm
13 ft.*lbf
without SST and union nut wrench
35.3 N*m
360 kgf*cm
26 ft.*lbf
No.2 steering intermediate shaft assembly set bolt x Rack and pinion power steering gear assembly (for AWD)
35.3 N*m
360 kgf*cm
26 ft.*lbf

bolt:

Engine room main wire x Rack and pinion power steering gear assembly (for 2WD)
9.0 N*m
92 kgf*cm
80 in.*lbf

nut:

Engine room main wire x Rack and pinion power steering gear assembly (for 2WD)
10 N*m
102 kgf*cm
7 ft.*lbf

nut:

Engine room main wire x Rack and pinion power steering gear assembly (for AWD)

 with SST and union nut wrench
6.4 N*m
65 kgf*cm
57 in.*lbf
without SST and union nut wrench
10 N*m
102 kgf*cm
7 ft.*lbf
Tie rod assembly lock nuts
88 N*m
897 kgf*cm
65 ft.*lbf