СТАРТЕР РАЗБОРКА


  1. REMOVE STARTER YOKE ASSEMBLY


    1. Remove the screw and terminal 50 wire.

    2. A01E114E01

      Remove the nut and disconnect the terminal C wire.

    3. Remove the 2 screws and O-rings, and pull out the starter yoke assembly with the armature assembly.

  2. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. A01DYOSE01

      Remove the 2 screws and magnet starter switch.

    2. Remove the return spring.

    3. A01E28TE01

      Remove the following parts from the starter housing.

      (1) Starter clutch
      (2) Starter armature pinion
      (3) Starter idler pinion
      (4) Retainer
      (5) Clutch roller
    4. A01DV9OE01

      Using a magnetic finger, remove the steel ball.

  3. REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. A01E30ME01

      Using a screwdriver, hold the spring back and disconnect the brush.

    2. Disconnect the 4 brushes and remove the brush holder.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01DW62E01

      Using a plastic-faced hammer, tap the end of the starter yoke and remove the armature.