RADIATOR DISASSEMBLY


  1. REMOVE RADIATOR BRACKET SUB-ASSEMBLY


    1. A01E228

      Remove the 4 bolts and 2 brackets.

  2. REMOVE RADIATOR DRAIN COCK PLUG


    1. Remove the drain plug.

    2. Remove the O-ring.

  3. ASSEMBLE SST


    1. A01DX40E01

      Install the claw to part A of the overhaul handle as shown in the illustration.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

    2. While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

      Dimension B
      0.2 to 0.3 mm (0.008 to 0.012 in.)

      Note

      If this adjustment is not performed, the claw will be damaged.

  4. UNCAULK LOCK PLATE


    1. A01E0CPE01

      Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

      SST
      09230-01010   ( 09231-01010, 09231-01030 )

  5. REMOVE RADIATOR TANK UPPER AND TANK LOWER


    1. A01E1ZJE01

      Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the tank.

    2. Remove the O-ring.