REAR CROSS TRAFFIC ALERT BUZZER REMOVAL

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Note:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here Click here).
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here Click here Click here).

REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

REMOVE REAR NO. 1 SEAT ASSEMBLY

for 60/40 Split Slide Walk-in Seat Type LH Side:
Remove the rear No. 1 seat assembly (Click here).
for 60/40 Split Slide Walk-in Seat Type RH Side:
Remove the rear No. 1 seat assembly (Click here).

REMOVE REAR NO. 1 SEATBACK ASSEMBLY

for 60/40 Split Double-folding Seat Type LH Side:
Remove the rear No. 1 seatback assembly (Click here).
for 60/40 Split Double-folding Seat Type RH Side:
Remove the rear No. 1 seatback assembly (Click here).

REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

REMOVE REAR DOOR SCUFF PLATE LH

REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)