SUSPENSION CONTROL ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. REMOVE PARKING BRAKE ECU ASSEMBLY

    Click here

  5. REMOVE ABSORBER CONTROL ECU


    1. B008HR9

      Disconnect the 2 connectors from the absorber control ECU.

    2. Disconnect the clamp from the absorber control ECU.

    3. Remove the 2 bolts and absorber control ECU.

      Note


      • Avoid any impact to the absorber control ECU.

      • Do not drop the absorber control ECU. If it is dropped, replace it with a new one.