AUTOMATIC LIGHT CONTROL SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

    1. Attach the 2 claws to install the automatic light control sensor.

    2. Connect the connector.

  2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click hereClick here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here

  4. CHECK SRS WARNING LIGHT

    Click here