FOOTWELL LIGHT(for Driver Side) INSPECTION

PROCEDURE

  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY

    1. Check the illumination.

      1. E352431C01

        *a

        Component without harness connected

        (No. 1 Interior Illumination Light Assembly)

        Apply battery voltage to the connector and check the illumination conditions.

        OK

        Measurement Condition

        Specified Condition

        Battery positive (+) → G200 - 2 (B)

        Battery negative (-) → G200 - 1 (L)

        Illuminates

        If the result is not as specified, replace the No. 1 interior illumination light assembly.