RADIO RECEIVER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 RADIO BRACKET

   1. Install the No. 1 radio bracket with the 3 screws.

2. INSTALL NO. 2 RADIO BRACKET

   1. Install the No. 2 radio bracket with the 3 screws.

3. INSTALL RADIO RECEIVER ASSEMBLY

   1. Connect each connector.

   2. Attach the 4 clips to install the radio receiver assembly with bracket.

   3. Install the 4 bolts.

      12 N*m

      122 kgf*cm

      9 ft.*lbf

4. INSTALL TELLTALE LIGHT ASSEMBLY

   Click here

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

7. INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here