VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1433

DTC Code DTC Name
C1433 Steering Angle Sensor Internal Circuit

DESCRIPTION

This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor (spiral with sensor cable sub-assembly).

DTC No.

DTC Detection Condition

Trouble Area

C1433

With the +BS terminal voltage between 9.6 and 16.5 V, a steering angle sensor malfunction signal is received from the steering angle sensor.

Steering angle sensor (spiral with sensor cable sub-assembly)

PROCEDURE

  1. REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

    1. Replace the steering angle sensor (spiral with sensor cable sub-assembly) (Click here).

      Tip:

      If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step (Click here).

    END