ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on (IG).

   3. Enter the following menus: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.

      
      Powertrain > Hybrid Control > Data List

      Tester Display
      Accel Pedal Pos #1
      Accel Pedal Pos #2

   4. Read the Data List.

      Result

      Tester Display Accelerator Pedal Condition Specified Condition Accel Pedal Pos #1 Not depressed 10 to 22% Fully depressed 52 to 90% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively Accel Pedal Pos #2 Not depressed 24 to 40% Fully depressed 68 to 95% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively