REAR COMBINATION LIGHT ASSEMBLY(w/ Rear No. 2 Seat) INSPECTION

PROCEDURE

1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (Rear Combination Light Assembly LH)

      Apply battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK

      Condition Specified Condition Battery positive (+) → Terminal 1 (B) Battery negative (-) → Terminal 3 (E) Taillight comes on Battery positive (+) → Terminal 2 (STP) Battery negative (-) → Terminal 3 (E) Stop light comes on Battery positive (+) → Terminal 4 (TRN) Battery negative (-) → Terminal 3 (E) Turn signal light comes on*1 Battery positive (+) → Terminal 4 (TRN) and 6 (TRN2) Battery negative (-) → Terminal 3 (E) Turn signal light comes on*2

      
      

      • *1: for Turn Signal Light Bulb Type

      • *2: for Turn Signal Light LED Type

      If the result is not as specified, replace the rear combination light assembly LH or rear light socket and wire LH.

2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (Rear Combination Light Assembly RH)

      Apply battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK

      Condition Specified Condition Battery positive (+) → Terminal 1 (B) Battery negative (-) → Terminal 3 (E) Taillight comes on Battery positive (+) → Terminal 2 (STP) Battery negative (-) → Terminal 3 (E) Stop light comes on Battery positive (+) → Terminal 4 (TRN1) Battery negative (-) → Terminal 3 (E) Turn signal light comes on*1 Battery positive (+) → Terminal 4 (TRN) and 6 (TRN2) Battery negative (-) → Terminal 3 (E) Turn signal light comes on*2

      
      

      • *1: for Turn Signal Light Bulb Type

      • *2: for Turn Signal Light LED Type

      If the result is not as specified, replace the rear combination light assembly RH or rear light socket and wire RH.