INSTRUMENT PANEL SAFETY PAD INSTALLATION

PROCEDURE


  1. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. When installing a new instrument panel safety pad sub-assembly:


      1. Immediately before installing the instrument panel safety pad sub-assembly, twist and cut off the portion as shown in the illustration.

        B0084HD

    2. Engage the 4 guides to temporarily install the instrument panel safety pad sub-assembly as shown in the illustration.

      B0086HMC02
      B00847Z Install in this Direction - -

      Note


      • Do not damage the instrument panel safety pad sub-assembly.

      • Do not allow the wire harnesses to interfere with the surrounding parts.

    3. Install the instrument panel safety pad sub-assembly with the 4 bolts <B>, 2 bolts <A> and nut <F>.

      B0087SIC04
      *a Bolt <A> *b Bolt <B>
      *c Clip *d Nut <F>
      Torque:
      Bolt<A>
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    4. Install the 2 clips.

    5. Engage each clamp.

      B00898YC01
      *A w/ Digital Audio Broadcasting Antenna or Television Antenna *B w/ Ion Generator
      *C w/ Headup Display - -

    6. Connect each connector.

    7. B008844C01
      B00847Z Install in this Direction

      Engage the 2 claws to connect the cooler (room temp. sensor) thermistor as shown in the illustration.

  2. CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/o Occupant Classification System)

    Click here

  3. CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/ Occupant Classification System)

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. B0085CPC01
      B00847Z Install in this Direction

      Engage the 2 clips and 2 claws to install the No. 1 instrument panel register assembly as shown in the illustration.

  5. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY


    1. B0083JGC01
      B00847Z Install in this Direction

      Engage the 4 clips to install the No. 1 instrument panel garnish sub-assembly as shown in the illustration.

  6. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL


    1. B0085Z0C01
      B00847Z Install in this Direction

      Engage the 2 guides as shown in the illustration.

    2. B0087RTC01
      B00847Z Install in this Direction

      Engage the 2 clips to install the No. 2 instrument panel speaker panel as shown in the illustration.

  8. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)

    Click here

  9. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL


    1. B0089MZC01
      B00847Z Install in this Direction

      Engage the 2 guides as shown in the illustration.

    2. B008734C01
      B00847Z Install in this Direction

      Engage the 2 clips to install the No. 1 instrument panel speaker panel as shown in the illustration.

  10. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Passenger Side Knee Airbag)


    1. Connect the connector.

    2. B0083T0C01
      B00847Z Install in this Direction

      Engage the 4 claws as shown in the illustration.

    3. Install the 2 bolts <D>.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    4. Install the lower instrument panel sub-assembly with the 3 screws <C>.

  11. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/ Passenger Side Knee Airbag)


    1. Connect the connector.

    2. B0083U7C01
      B00847Z Install in this Direction

      Engage the 4 claws as shown in the illustration.

    3. Install the lower instrument panel sub-assembly with the 5 screws <C>.

  12. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

    Click here

  13. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connector.

    2. Engage the clamp.

    3. B0087VCC01
      B00847Z Install in this Direction

      Engage the 2 guides as shown in the illustration.

    4. B0083TAC01
      B00847Z Install in this Direction

      Engage the 4 claws to install the No. 2 instrument panel under cover sub-assembly as shown in the illustration.

  14. INSTALL INSTRUMENT SIDE PANEL RH


    1. B00840HC01
      B00847Z Install in this Direction

      Engage the 3 guides as shown in the illustration.

    2. B0088POC01
      B00847Z Install in this Direction

      Engage the 4 clips and 2 claws to install the instrument side panel RH as shown in the illustration.

  15. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  16. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  17. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  18. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  19. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. Connect the connector.

    2. Install the radio tuner opening cover with bracket with the 4 bolts <B>.

  20. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Radio Receiver)


    1. Connect the connector.

    2. Engage the 5 clips as shown in the illustration.

      B00840CC01
      B00847Z Install in this Direction - -

    3. Engage the 4 clips in the order shown in the illustration to install the center instrument cluster finish panel assembly.

      B0084K0C01
      B00847Z Install in this Direction - -

  21. INSTALL INSTRUMENT CLUSTER FINISH PANEL COVER (w/o Radio Receiver)


    1. B0089FKC01
      B00847Z Install in this Direction

      Engage the 4 clips to install the instrument cluster finish panel cover as shown in the illustration.

  22. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

    Click here

  23. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/o Radio Receiver)

    Click here

  24. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. Engage the 11 clips to install the No. 3 instrument panel register assembly as shown in the illustration.

      B00844AC01
      B00847Z Install in this Direction - -

  25. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. w/ Switch:


      1. Connect the connector.

    2. B00889GC01
      B00847Z Install in this Direction

      Engage the 5 clips to install the lower instrument panel finish panel assembly as shown in the illustration.

  26. INSTALL COMBINATION METER ASSEMBLY

    Click here

  27. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Connect the connector.

    2. B008890C01
      B00847Z Install in this Direction

      Engage the 2 guides and 4 clips to install the instrument cluster finish panel assembly as shown in the illustration.

    3. Install the 2 clips.

  28. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    for LHD:

    Click here

    for RHD:

    Click here

  29. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. B0088RTC01
      B00847Z Install in this Direction

      Engage the 6 clips to install the No. 1 instrument panel sub-assembly as shown in the illustration.

  30. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  31. INSTALL NO. 2 METER HOOD CLUSTER


    1. B0083RDC01
      B00847Z Install in this Direction

      Engage the 3 clips to install the No. 2 meter hood cluster as shown in the illustration.

  32. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Engage the 2 claws to connect the DLC3 connector.

    2. Engage the 2 clamps.

    3. Connect the connector.

    4. B0086COC01
      B00847Z Install in this Direction

      Engage the guide as shown in the illustration.

    5. B0087SWC01
      B00847Z Install in this Direction

      Engage the 3 claws as shown in the illustration.

    6. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <C>.

  33. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. Engage the 2 claws to connect the DLC3 connector.

    2. Engage the clamp.

    3. Connect the connector.

    4. B0089MDC02
      B00847Z Install in this Direction

      Engage the 2 claws as shown in the illustration.

    5. Install the No. 1 instrument panel under cover sub-assembly with the 3 screws <C>.

  34. INSTALL INSTRUMENT SIDE PANEL LH


    1. B0083PGC01
      B00847Z Install in this Direction

      Engage the 3 guides as shown in the illustration.

    2. B0087N8C01
      B00847Z Install in this Direction

      Engage the 4 clips and 2 claws to install the instrument side panel LH as shown in the illustration.

  35. INSTALL FRONT PILLAR GARNISH LH

    Click here

  36. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  37. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

    Click here

  38. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  39. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  40. INSTALL TURN SIGNAL SWITCH

    Click here

  41. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

    Click here

  42. INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

    Click here

  43. INSTALL UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)

    Click here

  44. INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)

    Click here

  45. INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)

    Click here

  46. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  47. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  48. INSTALL STEERING WHEEL ASSEMBLY

    Click here

  49. CHECK STEERING WHEEL CENTER POINT

  50. INSTALL HORN BUTTON ASSEMBLY

    Click here

  51. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here