ENTRY AND START SYSTEM(for Entry Function) SYSTEM DIAGRAM


  1. CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


    • This is a detailed diagram related to the certification ECU (smart key ECU assembly).

    B008H1DE01
    B008I2VE04
    B008I2VE05

  2. Wireless Door Lock Control System (for LHD, w/ Door Control Battery)

    B008J89E04
    B008HR4E04
    B008GUIE03
    B008GUIE04
    B008HL0E03
    B008H5NE04

  3. Wireless Door Lock Control System (for LHD, w/o Door Control Battery)

    B008H0JE07
    B008IVPE09
    B008HOUE08
    B008H1UE08
    B008IMRE07

  4. Wireless Door Lock Control System (for RHD)

    B008J89E04
    B008HR4E05
    B008GUIE06
    B008GUIE05
    B008HL0E04
    B008H5NE05

  5. Double Locking System

    B008J1AE12
    Component Function
    Front door outside handle assembly

    Receives request signals from the certification ECU (smart key ECU assembly) via the built-in electrical key antenna (front door) and forms the vehicle exterior detection area.

    Uses the built-in touch sensor (lock sensor/unlock sensor) to detect the operation of the front door outside handle assembly and sends signals to the certification ECU (smart key ECU assembly).
    Rear door outside handle assembly

    Receives request signals from the certification ECU (smart key ECU assembly) via the built-in electrical key antenna (rear door) and forms the vehicle exterior detection area.

    Uses the built-in touch sensor (lock sensor/unlock sensor) to detect the operation of the rear door outside handle assembly and sends signals to the certification ECU (smart key ECU assembly).

    No. 1 indoor electrical key antenna assembly (front floor)

    No. 2 indoor electrical key antenna assembly (rear floor)

    No. 3 indoor electrical key antenna assembly (inside luggage)

    		 Receives the request code from the certification ECU (smart key ECU assembly) and forms the vehicle interior detection area.
    Electrical key antenna (outside luggage compartment) Receives the request code from the certification ECU (smart key ECU assembly) and forms the back door exterior detection area.
    Back door opener switch assembly Sends switch operation signals to the certification ECU (smart key ECU assembly).
    Door control receiver Receives the entry and start system code/wireless code sent from the electrical key transmitter sub-assembly and sends it to the certification ECU (smart key ECU assembly).
    Wireless door lock buzzer Sounds when warning functions operate in accordance with certification ECU (smart key ECU assembly) control.
    Electrical key transmitter sub-assembly Sends the ID code upon receiving a request signal.
    Certification ECU (smart key ECU assembly)

    Sends request codes to each electrical key antenna.

    Distinguishes and verifies the ID code from the electrical key transmitter sub-assembly and sends signals to each ECU in response to operated functions (controls entire system).

    Performs encryption code communication with the ID code box (immobiliser code ECU) when ignition operations are performed.