IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE

  1. REMOVE IGNITION COIL ASSEMBLY

    1. A327057

      Disconnect the 3 ignition coil assembly connectors.

    2. Remove the 3 bolts and 3 ignition coil assemblies from the cylinder head cover sub-assembly.

      Note:

      If an ignition coil assembly has been struck or dropped, replace it.

      Tip:

      Arrange the removed parts in the correct order.

  2. REMOVE SPARK PLUG

    1. A327058C01

      *a

      14 mm Spark Plug Wrench

      Using a 14 mm spark plug wrench, remove the 3 spark plugs from the cylinder head sub-assembly.

      Note:

      If a spark plug has been struck or dropped, replace it.

      Tip:

      Arrange the removed parts in the correct order.