HEATED OXYGEN SENSOR REMOVAL

PROCEDURE

  1. REMOVE FRONT NO. 3 ENGINE UNDER COVER (for Full Cover Type)

    1. Remove the 4 clips and front No. 3 engine under cover.

  2. REMOVE HEATED OXYGEN SENSOR

    1. A355363C02

      *1

      Wire Harness Clamp Bracket

      Disconnect the heated oxygen sensor connector.

    2. Disengage the 2 wire harness clamps.

    3. Remove the wire harness clamp bracket from the heated oxygen sensor.

    4. A355364N01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      09224-00011

      Note:

      If the heated oxygen sensor has been struck or dropped, replace it.