ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА УСТАНОВКА


  1. INSTALL CAMSHAFT POSITION SENSOR


    1. B007T9B

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

    2. B007VA3

      Install the camshaft position sensor with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Be careful that the O-ring is not cracked or jammed when installing the camshaft position sensor.

    3. Connect the camshaft position sensor connector.

  2. INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY


    1. B007TSM

      Install the vane pump oil reservoir assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }