SPEED LIMITER SYSTEM PRECAUTION

  1. IGNITION SWITCH EXPRESSION

    Tip:

    The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression

    Ignition Switch (position)

    Engine Switch (condition)

    Ignition Switch off

    Off

    Off

    Ignition Switch ON

    ON

    On (IG)

    Ignition Switch ACC

    ACC

    On (ACC)

    Engine Start

    START

    Start

  2. HANDLING PRECAUTION FOR SPEED LIMITER SYSTEM

    1. Turn the speed limiter main switch off when not using the speed limiter system.

    2. Be careful as the vehicle speed increases when driving downhill with the speed limiter system on.

    3. The RESUME/ACCEL operation changes according to the speed limiter system status. When the speed limiter system is operating, ACCEL operates. When the speed limiter system is not operating, RESUME operates.

    4. When the speed limiter system is operating and the speed limiter indicator light goes off, turn the speed limiter main switch off to reset the speed limiter system. After the reset, if the speed limiter main switch cannot be turned on, or the speed limiter system is canceled immediately after turning the speed limiter main switch on, the system may have a malfunction.

    5. Do not use the speed limiter system where the road conditions are as follows:

      • Steep downhill

      • Roads with sharp turns

      • Icy or snowy roads

      • Slippery roads

    6. Do not use the speed limiter system when the vehicle is towing a trailer, etc.