REAR CENTER SEAT ASSEMBLY(for Rear No. 1 Seat) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. INSTALL REAR CENTER NO. 1 SEATBACK FRAME SUB-ASSEMBLY

    1. Temporarily install the rear center No. 1 seatback frame sub-assembly with the 4 bolts.

    2. Tighten the 4 bolts.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

  2. INSTALL NO. 2 REAR SEAT LOCK CONTROL CABLE

    B298182E02

    1. Install the No. 2 rear seat lock control cable in the order shown in the illustration.

    2. Attach the clamp of the cable end.

  3. INSTALL NO. 1 REAR SEAT LOCK CONTROL CABLE

    B298183E03

    1. Install the No. 1 rear seat lock control cable in the order shown in the illustration.

    2. Attach the clamp of the cable end.

    3. Install a new cable tie.

      Table 1. Text in Illustration

      *1

      Cable Tie

      *2

      Clamp
    4. B272385E03

      Cut off the end of the cable tie as shown in the illustration.

      Table 2. Text in Illustration

      *a

      Cut Here

      *b

      5 mm (0.20 in.)

      *c

      Correct

      *d

      Incorrect
      Tip:

      Make sure that the end of the cable tie faces the seatback board.

  4. INSTALL CENTER SEAT CUSHION FRAME SUB-ASSEMBLY

    1. Temporarily install the center seat cushion frame sub-assembly with the 2 bolts.

    2. Using a T45 "TORX" socket wrench, temporarily install the 2 spacers with the 2 "TORX" bolts.

    3. Using a T45 "TORX" socket wrench, tighten the 2 "TORX" bolts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

    4. Tighten the 2 bolts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

  5. INSTALL REAR SEATBACK WITH COVER PAD SUB-ASSEMBLY

    1. B224005

      Install the rear seatback with cover pad sub-assembly.

    2. B298179

      Attach the 2 hooks.

  6. INSTALL REAR SEAT HEADREST SUPPORT

    B224004

    1. Attach the 4 claws to install the 2 rear headrest supports.

  7. INSTALL REAR SEATBACK HINGE COVER

    1. B224001

      Attach the 3 claws to install the rear seatback hinge cover to the rear center No. 1 seat armrest bracket.

    2. B224066

      Install the hinge cover together with the rear center No. 1 seat armrest bracket and the 2 bushes with the 2 bolts.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

  8. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY

    1. B273963

      Install the rear center seat armrest assembly with the 2 nuts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

  9. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY

    1. B273961

      Attach the 2 hooks.

    2. Attach the 4 claws.

    3. Attach the 4 hooks to install the rear seatback board sub-assembly.

  10. INSTALL REAR CENTER BACK LOCK CONTROL LEVER

    1. B273883E08

      Connect the 2 cables in the order shown in the illustration.

    2. Attach the 2 clamps of the cable ends.

      Table 3. Text in Illustration

      *a

      Red Colored

      *b

      Blue Colored
    3. B223312

      Attach the 2 claws to install the rear center back lock control lever.

    4. Install the screw.

  11. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY

    1. B223999E01

      Using hog ring pliers, install the center seat cushion cover sub-assembly to the rear center seat cushion pad with new hog rings.

      Table 4. Text in Illustration

      *1

      Hog Ring Pliers
      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. B223998E01

      Using hog ring pliers, attach the center seat cushion cover sub-assembly to the rear center seat cushion pad with new hog rings.

      Table 5. Text in Illustration

      *1

      Hog Ring Pliers
      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  12. INSTALL REAR CENTER SEAT CUSHION COVER WITH PAD

    1. Attach the 5 hooks to install the rear center seat cushion cover with pad to the center seat cushion frame sub-assembly.

    2. Using hog ring pliers, attach the center seat cushion cover with pad to the center seat cushion frame sub-assembly with new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      B273919E01
      Table 6. Text in Illustration

      *1

      Hog Ring Pliers

      -

      -

    3. Close the upper part of the center seat cushion cover sub-assembly.

    4. B273917

      Attach the rubber band as shown in the illustration.

    5. Pass the 2 seatback cover rubber bands through the 2 seat cushion cover rubber bands.

    6. Attach the 2 seatback cover rubber bands.

      B273916E02
      Table 7. Text in Illustration

      *1

      Seatback Cover Rubber Band

      *2

      Seat Cushion Cover Rubber Band

    7. Attach the 4 hooks to close the cover.

      B298178

  13. INSTALL REAR SEAT LEG SIDE COVER

    B223993E03

    1. Attach the hook labeled A.

    2. Attach the 2 hooks labeled B to install the rear seat leg side cover.

      Table 8. Text in Illustration

      *1

      Hook A

      *2

      Hook B

    3. Install the 2 screws.

  14. INSTALL REAR SEAT INNER BELT ASSEMBLY (for RH Side)

    Click here

  15. INSTALL REAR SEAT NO. 2 LEG SIDE COVER

    B223992E02

    1. Attach the hook labeled A.

    2. Attach the 2 hooks labeled B to install the rear seat No. 2 leg side cover.

      Table 9. Text in Illustration

      *1

      Hook A

      *2

      Hook B

    3. Install the 2 screws.

  16. INSTALL REAR SEAT INNER BELT ASSEMBLY (for LH Side)

    Click here

  17. INSTALL REAR SEAT TRACK COVER LH

    B223991

    1. Attach the clip.

    2. Attach the 2 claws to install the rear seat track cover LH.

  18. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

    1. Install the rear center seat headrest assembly.