METER / GAUGE SYSTEM


  1. FUNCTION


    1. Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Engine Start while Driving Notice
        2 Engine Switch Operation while Driving Warning
        3 Front Seat Belt Warning (Level 2)
        4 Rear Seat Belt Warning*1
        5 Front Seat Belt Warning (Level 1)
        6 Lane Keeping Assist System Cancel Warning*2
        7 Emergency Stop Warning
        8 Unexpected Vehicle Motion Warning
        9 Brake Fluid Low Warning
        10 Engine Oil Pressure Warning
        11 EPS Warning
        12 Lane Departure Alert System Warning*3
        13 Engine Coolant Temperature Warning
        14 Door Open when Shift Lever not in P Warning
        15 Entry and Start System Warning (Continuous)
        16 Entry and Start System Warning 1 (Intermittent)
        17 P Position Operation Advice
        18 Entry and Start System Warning 2 (Intermittent)
        19 Entry and Start System Warning (Once)
        20 Multi-information Display Warning
        21 Accelerator Depression Hold Warning
        22 Electric Parking Brake System Cancel Warning
        23 Brake Hold System Control Not Release Warning
        24 Dynamic Radar Cruise Control Cancellation due to Low Speed Warning*4
        25 Low Speed Zone Leading Vehicle Lost Warning*4
        26 Hands off Steering Wheel Warning
        27 Dynamic Radar Cruise Control Warning
        28 Immobiliser Certification Reminder
        29 Speed Limit Exceed Warning*5
        30 Parking Brake Engaged Warning
        31 Door Open while Driving Warning
        32 Sport Shift Reject Warning
        33 Light Reminder
        34 Turn Signal/Hazard Warning Operation

        *1: Models with rear seat belt warning function

        *2: Models with lane keeping assist system

        *3: Models with lane departure alert system

        *4: Models with dynamic radar cruise control system

        *5: Models for G. C. C. countries

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flow chart below:

          B007WJNE05
          Item Display Change Condition
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence
          *d Item or display is selected by operating the steering pad switch
          *e Odometer display is displayed for a certain period of time after the engine switch is turned off
          *f After engine switch is turned on (IG)

      2. Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

          B007WHXC01
          *A Models with Stop and Start System - -
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information *d Navigation Information
          *e Audio Information *f Driving Assist System Information
          *g Stop and Start System Information *h Message
          *i Settings *j The illustrations shown are examples only.
          B007WKJ RIGHT switch operation B007WJ2 LEFT switch operation

      3. Drive Information


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B007WH6C01
          *A AWD Models *B Models with Lane Keeping Assist System
          *C Models with TFT LCD Meter *D

          Models with Lane Keeping Assist System

          Models with 8AR-FTS Engine
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Eco Drive Indicator Zone Display
          *g Boost Meter/Oil Pressure Gauge/Oil Temperature Gauge *h G Monitor
          *i Tire Pressure Indicator *j AWD Control
          *k Sway Warning *l Blank
          *m The illustrations shown are examples only. - -
          B007WKJ DOWN switch operation B007WJ2 UP switch operation

      4. Stop and Start System Information Mode Function (Models with Stop and Start System)


        • Stop and start system information shows vehicle information such as idling stop time and saved fuel.

        • The stop and start system information can be switched using the UP/DOWN switch on the steering pad switch assembly.

          B007WJLC02
          *1 Steering Pad Switch Assembly *2 UP Switch
          *3 DOWN Switch - -
          *a UP Switch *b DOWN Switch
          *c Total Amount of Engine Stoppage Time / Amount of Engine Stoppage Time After Engine Start-up / Amount of Engine Stoppage Time Between Reset Operations *d Total Amount of Engine Stoppage Time / Amount of Saving Fuel After Engine Start-up / Amount of Saving Fuel Between Reset Operations
          *e The illustrations shown are examples only. - -
          B007WKJ DOWN switch operation B007WJ2 UP switch operation

      5. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

          Lane Keeping Assist System (Models with Lane Keeping Assist System)
          Item Available Setting
          Lane Center

          • Setting for Lane Center can be set to on/off:


            • On

            • Off
          Steering Assist Settings

          • Setting for Steering Assist can be selected:


            • Full

            • Warning

            • Assist
          Steering Assist

          • Setting for Lane Center can be set to on/off:


            • On

            • Off
          Warning Method

          • Warning method can be changed:


            • Steering wheel vibration (Icon is displayed)

            • Buzzer (Icon is displayed)
          Warning Sensitivity

          • Alert sensitivity of alert system can be changed:


            • High

            • Normal
          Unsteady Driving Detection

          • Unsteady driving detection sensitivity can be selected:


            • On

            • Off
          Unsteady Driving Detection Sensitivity

          • Unsteady driving detection sensitivity can be selected:


            • High

            • Medium

            • Low
          Pre-crash Safety System (Models with Pre-crash Safety System)
          Item Available Setting
          PCS

          • The pre-crash safety system can be set to on/off:


            • On

            • Off
          Pre-crash safety warning timing

          • The pre-crash safety system warning timing can be selected:


            • Far (Icon is displayed)

            • Middle (Icon is displayed)

            • Near (Icon is displayed)
          Blind Spot Monitor System (Models with Blind Spot Monitor System)
          Item Available Setting
          BSM

          • The blind spot monitor system can be set to on/off:


            • ON

            • OFF
          RCTA

          • The RCTA function can be set to on/off:


            • ON

            • OFF
          LEXUS Parking Assist-sensor System (Models with LEXUS Parking Assist-sensor System)
          Item Available Setting
          LEXUS Parking Assist-sensor System

          • The LEXUS parking assist-sensor system can be set to on/off:


            • ON

            • OFF
          Speed Warning
          Item Available Setting
          Speed Warning

          • The speed warning system can be set to on/off:


            • ON

            • OFF
          Speed Setting The vehicle speed for speed warning activation can be set at increments of 10 km/h (10 mph) between 30 km/h and 260 km/h (20 mph to 160 mph).
          Road Sign Assist
          Item Available Setting
          Road Sign Assist

          • The road sign assist system can be set to on/off:


            • ON

            • OFF
          Excess Speed

          • The excess speed notification method can be selected:


            • No Notification

            • Only Visual

            • Visual & Audible
          Notification The excess speed notification level can be set between -5 km/h and 10 km/h (-5 mph to 10 mph).
          Others

          • The other notifications method can be selected:


            • No Notification

            • Only Visual

            • Visual & Audible
          Headup display (Models with Headup Display)
          Item Available Setting
          Display Brightness/Position

          • The brightness and position of the headup display image can be changed:

          • When changing the brightness of the headup display image, press the RIGHT or LEFT switch on the steering pad switch assembly.

          • When changing the position of the headup display image, press the UP or DOWN switch on the steering pad switch assembly.
          Eco Driving Indicator Zone Display/Tachometer

          • The display content of the headup display image can be selected:


            • Eco Driving Indicator Zone Display

            • Tachometer

            • No content
          Display Content

          • The display content of the headup display can set to on/off:


            • Route guidance to destination

            • Lane keeping assist system status

            • Driving assist system status

            • Compass

            • Audio system operation status
          Clock
          Item Available Setting
          Display Mode

          • The display mode of the clock can be selected:


            • 12 Hour Display

            • 24 Hour Display
          Clock Adjust* Select to adjust clock of the multi-information display.

          *: Models without navigation system

          Vehicle settings
          Item Available Setting
          PBD*1 Function

          • The function of the following switches or sensors can be set to on/off:


            • Main Switch On

            • Touchless Sensor Off

            • Main Switch Off
          Opening Angle

          • The opening angle of the power back door can be selected:


            • 5

            • 4

            • 3

            • 2

            • 1
          Buzzer Sound Volume

          • The sound volume of the power back door buzzer can be selected:


            • High

            • Medium

            • Low
          Stop & Start*2

          • The idling stop time of stop and start system can be selected:


            • Standard

            • Extended
          TPMS The tire pressure monitor system can be initialized.
          Scheduled Maintenance The maintenance required reminder function can be reset.
          Oil Maintenance The oil maintenance management function can be reset.

          *1: Models with power back door system

          *2: Models with stop and start system

          Meter Settings
          Item Available Setting
          Language

          • The language used on the multi-information display can be selected:


            • English

            • French

            • Spanish

            • German

            • Italian

            • Russian
          Unit

          • The unit displayed on the multi-information display can be selected:


            • miles (MPG (US))

            • miles (MPG (Imperial))

            • km (L/100 km)

            • km (km/L)
          Eco Driving Indicator Light

          • The Eco Driving Indicator Light can be switched:


            • ON (Default)

            • OFF
          TOP Switch Settings

          • The item that is displayed when the TOP switch is pressed can be selected among the following:


            • Drive Information 1 (Default)

            • Drive Information 2

            • Drive Information 3

            • Eco Drive Indicator Zone Display

            • Tire Pressure Indicator

            • AWD Control

            • Sway Warning*1

            • Boost Meter / Oil Pressure Gauge / Oil Temperature Gauge*2, *6

            • G Monitor*2

            • Blank

            • Navigation Information*3

            • Audio Information

            • Dynamic Radar Cruise System Information*4 / Lane Departure Alert System Information*1

            • Message

            • Settings
          Drive Information 1

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) (Default of upper area)

            • Total Average Fuel Consumption Between Reset Operations (Default of lower area)

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range

            • Blank
          Drive Information 2

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations (Default of lower area)

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range (Default of upper area)

            • Blank
          Drive Information 3

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling (Default of upper area)

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up (Default of lower area)

            • Cruising Range

            • Blank
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON (Default) or OFF:


            • Turn-by-turn Navigation Display*3

            • Incoming Telephone Display

            • Stop and Start System Duration

            • Stop and Start System Status

            • Rheostat
          Accent Color*5

          • The accent color can be changed:


            • White Heat (Default)

            • Titanium Silver
          Needle Color*2

          • The needle color of the tachometer can be changed:


            • Blue (Default)

            • Red

            • White
          Rev Indicator*2

          • The rev indicator setting can be switched:


            • ON (Default at 5000 rpm)

            • OFF

          Tech Tips

          The engine speed for rev indicator activation can be set at increments of 100 rpm between 2000 rpm and 6100 rpm*6 or 6600 rpm*7.
          Tachometer Peak Hold Function*2

          • The tachometer peak hold function can be switched:


            • ON (Default)

            • OFF
          Initialization The set items can be initialized.

          *1: Models with lane departure alert system

          *2: Models with TFT LCD meter

          *3: Models with navigation system

          *4: Models with dynamic radar cruise control system

          *5: Models with optitron meter

          *6: Models with 8AR-FTS engine

          *7: Models with 2GR-FKS engine

      6. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the current display on the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 AWD TEST MODE - -
        CDY-2 - -
        CDY-4 - -
        ADJUSTING LDA CAMERA - -
        ADJUSTING FRONT RADAR BEAM - -
        ERROR ADJUSTING FRONT RADAR BEAM - -
        ADJUSTING FRONT RADAR BEAM VERTICAL - -
        ADJUSTING FRONT RADAR BEAM HORIZONTAL - -
        CHECKING PRE-CRASH BRAKE - -
        CHECKING CRUISE CONTROL C/D - -
        CHECKING CRUISE CONTROL BRAKE - -
        END OF ADJUSTMENT - -
        MEMORY ERROR - -
        Headlight System Uninitialized Visit Your Dealer - -
        Brake! - -
        Push and Hold Engine Switch for Emergency Stop Blinks Sounds
        Shift to N and Press Engine Switch to Restart Blinks Sounds
        Engine Stopped Shift to P Blinks Sounds
        Engine Stopped Stop in a Safe Place Blinks Sounds
        Push and Hold Engine Switch for Emergency Stop Blinks Sounds
        2 Dynamic radar cruise control warning reminder indicator (image display) - -
        Lane keeping assist warning reminder indicator (image display) - -
        Braking Power Low Stop in a Safe Place See Owner's Manual - Sounds
        Release Accelerator and Depress Brake Blinks Sounds
        Keep Depressing Brake Blinks Sounds
        Object Detected Ahead Vehicle Speed Reduced Blinks Sounds
        Accelerator Stuck Depress Brake to Stop Blinks Sounds
        3 Door open (while driving) Blinks Sounds
        Door open - -
        Clearance sonar detection (image display) - -
        4 Power Turned Off to Save Battery - -
        5 Shift to P Before Exiting Vehicle Blinks Sounds
        6 Check Power Steering System Illuminates Sounds
        Power Steering Malfunction Steering Power Low Visit Your Dealer Illuminates → Blink Sounds
        Power Steering Malfunction Steering Power Low Visit Your Dealer Illuminates Sounds
        Steering Power Low Visit Your Dealer Illuminates → Blink Sounds
        Steering Power Low Visit Your Dealer Illuminates Sounds
        Power Steering Malfunction Visit Your Dealer Illuminates Sounds
        Release Parking Brake Blinks Sounds
        Vehicle May Roll Shift to P Blinks Sounds
        Brake Hold Fault Depress Brake to Deactivate Visit Your Dealer Illuminates Sounds
        Brake Hold Warning Depress Brake on Slope Blinks Sounds
        Wiper System Malfunction Visit Your Dealer Illuminates Sounds
        EPB Activation Stopped Incompletely Blinks Sounds
        Key Not Detected Check Key Location - Sounds
        Release Parking Brake while Depressing Brake - Sounds
        Release Accelerator Blinks Sounds
        7 Speed Limit Exceeded - Sounds
        Lane Keeping Assist Driver Attention Required Illuminates Sounds
        Lane Departure Alert Driver Attention Required Illuminates Sounds
        LKA Hold Steering Wheel - -
        LDA Hold Steering Wheel - -
        LDA Steering Assist Unavailable Hold Steering Wheel Illuminates Sounds
        LKA Steering Assist Unavailable Hold Steering Wheel Illuminates Sounds
        LKA Hold Steering Wheel Illuminates Sounds
        LDA Hold Steering Wheel Illuminates Sounds
        Parking Brake Overheated Parking Brake Unavailable Illuminates Sounds
        8 Check Engine Visit Your Dealer Illuminates Sounds
        Check Engine Reduced Engine Power Visit Your Dealer Illuminates Sounds
        SRS Airbag System Malfunction Visit Your Dealer Illuminates Sounds
        Antilock Brake System Malfunction Visit Your Dealer - Sounds
        Engine Coolant Temp High Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Charging System Malfunction See Owner's Manual - -
        Radar Cruise Control Unavailable Clean Sensor Illuminates Sounds
        Radar Cruise Control Unavailable Illuminates Sounds
        Radar Cruise Control Unavailable Depress Brake to Resume Driving - -
        Smart Entry & Start System Malfunction See Owner's Manual Illuminates Sounds
        Blind Spot Monitor Unavailable Illuminates Sounds
        Cruise Control Malfunction Visit Your Dealer Illuminates Sounds
        Cruise Control Fault Press Brake to Deactivate Visit Your Dealer Illuminates Sounds
        Lane Departure Alert Malfunction Visit Your Dealer Illuminates Sounds
        Lane Keeping Assist Malfunction Visit Your Dealer Illuminates Sounds
        Forward Camera System Unavailable - -
        Lane Departure Alert Unavailable Illuminates Sounds
        Lane Keeping Assist Unavailable Illuminates Sounds
        Lane Departure Alert Turned On Steering Assist Active - -
        Lane Keeping Assist Turned On Steering Assist Active - -
        Lane Departure Alert Turned On Steering Assist Inactive - -
        Lane Keeping Assist Turned On Steering Assist Inactive - -
        Forward Camera System Unavailable Clean Windshield - -
        Prolongs Stop & Start and Reduces AC Output - -
        Balances Stop & Start and AC Output - -
        Pre-Crash Safety System Malfunction Visit Your Dealer - -
        Blind Spot Monitor System Malfunction Visit Your Dealer Illuminates Sounds
        Oil Pressure Low Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Transmission Fluid Temp High See Owner's Manual Illuminates Sounds
        AWD System Malfunction 2WD Mode Engaged Visit Your Dealer Illuminates Sounds
        Braking Power Low Visit Your Dealer - Sounds
        Parking Brake Unavailable Illuminates Sounds
        Electronic Parking Brake Malfunction Visit Your Dealer Illuminates Sounds
        Radar Cruise Active Please Pay Attention to Other Vehicles - -
        Lane Departure Alert Unavailable Below Approx 50km/h - -
        Lane Keeping Assist Unavailable Below Approx 50km/h - -
        Lane Departure Alert Unavailable Below Approx 32MPH - -
        Lane Departure Alert Unavailable at Current Speed - -
        Lane Keeping Assist Unavailable at Current Speed - -
        9 Dynamic radar cruise control (image display) - -
        Lane keeping assist (image display) - -
        Stop & Start System Malfunction Visit Your Dealer Illuminates Sounds
        Engine Stopped Steering Power Low Illuminates Sounds
        Turn Off Vehicle Blinks Sounds
        Would You Like to Take Rest? - Sounds
        Please Take Rest - Sounds
        Key Left inside Vehicle - -
        Turn Lights Off Blinks Sounds
        Moon Roof Open Blinks Sounds
        Window Open Blinks Sounds
        Window / Moon Roof Open Blinks Sounds
        Depress Brake and Then Start Engine - -
        Depress Brake and Then Start Engine - Sounds
        10 Steering Wheel Lock Press Engine Switch while Turning Wheel Blinks Sounds
        Brake Hold Malfunction Visit Your Dealer Illuminates Sounds
        Brake Hold Less Effective during Icy Conditions Illuminates Sounds
        Brake Hold Active Depress Brake and Switch to Deactivate - Sounds
        Brake Hold Unavailable Driver Seat Belt Unbuckled - Sounds
        Brake Hold Unavailable Hood or Trunk Open - Sounds
        Depress Brake to Maintain Brake Hold - Sounds
        Close Driver Door to Maintain Brake Hold - Sounds
        Fasten Driver Seat Belt to Maintain Brake Hold - Sounds
        Parking Brake Activated Release before Driving - -
        AWD System Overheated 2WD Mode Engaged Blinks Sounds
        AWD System Overheated Switching to 2WD Mode Blinks Sounds
        Automatic Brake Assist Malfunction Visit Your Dealer Illuminates Sounds
        Drive-Start Control Malfunction Visit Your Dealer Illuminates Sounds
        Brake Override Malfunction Visit Your Dealer Illuminates Sounds
        11 Key Battery Low - Sounds
        Power Back Door Sensor Performance Is Reduced Clean Rear Emblem Illuminates Sounds
        Engine Oil Level Low Add or Replace - -
        Headlight System Malfunction Visit Your Dealer Illuminates Sounds
        Check RSA System Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        Tire pressure indicator (image display) - -
        12 Windshield Washer Fluid Low - -
        Fuel Low - -
        Roads May Be Icy Drive with Care - Sounds
        Traction Control Turned Off - -
        Oil Maintenance Required Soon - -
        Maintenance Required Soon - -
        Injector Maintenance Required Soon Illuminates -
        Oil Maintenance Required Visit Your Dealer - -
        Maintenance Required Visit Your Dealer - -
        Injector Maintenance Required Visit Your Dealer Illuminates -
        To Activate Auto High Beam, Switch Headlights to High Beam - -
        To Activate AHS, Switch Headlights to High Beam - -
        A New Key has been Registered Contact Your Dealer for Details - -
        Depress Brake and Then Start Engine - -
        Depress Brake and Power to Start - -
        VSC Turned Off Pre-Crash Brake System Unavailable - -
        Pre-Crash Safety System Unavailable - -
        High Power Consumption Partial Limit On AC/Heater Operation Blinks -
        Pre-Crash Safety System Unavailable - -
        Pre-Crash Safety System Unavailable Clean Sensor - -
        Pre-Crash Safety System Off - -
        Theft Sensor Turned Off - -
        Theft Sensor Turned On - -
        Automatic Mode On Shift Operation Sets or Releases Parking Brake - Sounds
        Automatic Mode Off - Sounds

  2. OPERATION


    1. Eco Driving Indicator Light and Eco Indicator Zone Display


      1. The following table shows the operation of Eco Driving Indicator Light and Eco indicator zone display in different driving conditions:

        Driving Condition Eco Driving Indicator Light Eco Indicator Zone Display
        While Stopped Turns off B007WHU
        While Eco Driving Turns on B007WIA
        While Non-eco Driving Turns off B007WIQ

        When any of the following conditions is met, operation is stopped.


        • Engine switch off.

        • Engine stopped.

        • Shift lever is not in D.

        • SPORT mode*1/SPORT S or SPORT S+ mode*2 is selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        		 Turns off B007WJZ

        *1: Models with optitron meter

        *2: Models with TFT LCD meter