THROTTLE BODY REMOVAL

PROCEDURE


  1. DRAIN COOLANT (for Engine)

    Click here

  2. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A005ATA

      Disconnect the connector.

    2. A005CAC

      Loosen the hose clamp and disconnect the air cleaner hose assembly.

    3. Remove the 2 clamps and air cleaner cap sub-assembly.

  4. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CASE


    1. Remove the air cleaner filter element sub-assembly.

    2. A005DHO

      Disconnect the water hose from the 3 clamps.

    3. Remove the 3 bolts and air cleaner case.

  6. REMOVE AIR CLEANER HOSE ASSEMBLY


    1. A005F1U

      Disconnect the ventilation hose from the cylinder head cover sub-assembly.

    2. Loosen the hose clamp and remove the air cleaner hose assembly.

  7. REMOVE THROTTLE BODY ASSEMBLY


    1. Type A:


      1. A005C3G

        Disconnect the connector.

      2. Disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose.

      3. Remove the 2 bolts, 2 nuts and throttle body assembly.

      4. A005EIV

        Remove the gasket from the intake manifold.

    2. Type B:


      1. A005B8V

        Disconnect the connector.

      2. Disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose.

      3. Remove the 4 bolts and throttle body assembly.

      4. A0059S0

        Remove the gasket from the intake manifold.