PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE

  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    1. D105091C02

      *1

      Neutral Basic Line

      *2

      Groove

      Loosen the bolt of the park/neutral position switch assembly and move the shift lever to N.

    2. Align the groove with the neutral basic line.

    3. Hold the switch in position and tighten the bolt.

      13 N*m

      130 kgf*cm

      10 ft.*lbf

  2. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    (Click here)