BLIND SPOT MONITOR SENSOR REMOVAL

PROCEDURE

  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tip:

    Use the same procedure described for the LH side.

  3. REMOVE JACK BOX HOLE COVER

    Click here

  4. REMOVE REAR BUMPER BAR PLATE

    Click here

  5. REMOVE REAR BUMPER COVER

    Click here

  6. REMOVE BLIND SPOT MONITOR SENSOR LH

    Note:

    • Avoid any impact to the blind spot monitor sensor LH.

    • Do not drop the blind spot monitor sensor LH. If it is dropped, replace it with a new one.

    1. B356822

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor LH.

  7. REMOVE BLIND SPOT MONITOR SENSOR RH

    Note:

    • Avoid any impact to the blind spot monitor sensor RH.

    • Do not drop the blind spot monitor sensor RH. If it is dropped, replace it with a new one.

    1. B356823

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor RH.