FRONT BLOWER MOTOR REMOVAL

PROCEDURE

  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/o PTC Heater)

    1. E143991

      Disconnect the connector.

    2. Remove the 3 screws and motor.

  3. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY (w/ PTC Heater)

    1. E143990E03

      Remove the quick heater connector screw.

      Table 1. Text in Illustration

      *1

      Quick Heater Connector Screw

    2. Disconnect the connector.

    3. Remove the 3 screws and motor.