REAR DIFFERENTIAL CARRIER ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • B00281GC03
    *a Object Exceeding Weight Limit of Transmission Jack

    Be sure to perform this procedure with several people as the rear differential carrier assembly is very heavy.

  • Be sure to follow the procedure described in the repair manual, or the transmission jack may suddenly drop or a part may fall.

Tech Tips

The following procedures are for BD20 (w/o Differential Lock).

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. REMOVE REAR PROPELLER SHAFT ASSEMBLY

    Click here

  3. DRAIN DIFFERENTIAL OIL

    Click here

  4. REMOVE REAR AXLE SHAFT WITH BACKING PLATE LH

    Click here

  5. REMOVE REAR AXLE SHAFT WITH BACKING PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    A01W99G

    1. Remove the 10 nuts, 10 washers and rear differential carrier assembly.

      CAUTION:

      The rear differential carrier assembly is a heavy component. Make sure that it is supported securely.

      Note


      • Securely support the rear differential carrier assembly while performing this step to avoid excessively tilting or dropping the rear differential carrier assembly.

      • The remaining oil may leak out when removing the rear differential carrier assembly.

      • Do not damage the installation surface when removing the rear differential carrier assembly.

      • Remove the bolts with the rear differential carrier assembly secured.

  7. REMOVE REAR DIFFERENTIAL CARRIER GASKET