FRONT STABILIZER BAR REMOVAL

Tech Tips


  • Use the same procedures for the RH side and LH side.


  • The procedures listed below are for the LH side.


  • A bolt without a torque specification is shown in the standard bolt chart.


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

    A01E263E02

    1. Remove the 2 nuts and stabilizer link.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  4. REMOVE FRONT STABILIZER BRACKET

    A01DZG4E02

    1. Remove the 4 bolts and 2 brackets.

  5. REMOVE FRONT NO. 1 STABILIZER BAR BUSH


    1. Remove the 2 bushes.

  6. REMOVE FRONT STABILIZER BAR


    1. Remove the stabilizer bar front from the vehicle body.