TILT AND TELESCOPIC MANUAL SWITCH INSTALLATION

PROCEDURE

1. INSTALL TILT AND TELESCOPIC SWITCH

   
   

   1. Engage the claw to install the tilt and telescopic switch.

   2. Connect the tilt and telescopic connector to the tilt and telescopic switch.

   3. Connect the spiral cable connector to the spiral cable sub-assembly.

2. INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   for 2AR-FE: Click here

   for A25A-FKS: Click here

   for 2GR-FKS: Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. INSPECT SRS WARNING LIGHT

   Click here

5. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

   Click here

6. PERFORM INITIALIZATION AND CALIBRATION (w/ Parking Assist Monitor System)

   for Initialization: Click here

   for Calibration: Click here