FRONT CONSOLE BOX INSTALLATION

PROCEDURE

1. INSTALL CONSOLE BOX ASSEMBLY

   
   

   1. Install the console box assembly with the 4 bolts and 2 screws.

2. INSTALL CONSOLE BOX CARPET

   
   

   1. 

      Install in this Direction

      Install the console box carpet as shown in the illustration.

3. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY

   
   

   1. w/ Power Outlet Socket:

      
      

      1. Connect the connector.

   2. 

      Install in this Direction

      Engage the 6 claws and 4 clips to install the console rear end panel sub-assembly as shown in the illustration.

4. INSTALL INSTRUMENT PANEL CUP HOLDER

   
   

   1. Engage the 2 claws.

   2. Install the instrument panel cup holder with the 3 screws.

5. INSTALL FRONT CONSOLE BOX INSERT SUB-ASSEMBLY

   
   

   1. Install the front console box insert sub-assembly with the 5 screws.

6. INSTALL SHIFT POSITION INDICATOR

   for UA80E:

   Click here

   for UB80E:

   Click here

   for U760E:

   Click here

   for U761E:

   Click here

7. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

   
   

   1. Connect each connector.

   2. Engage the clamp.

   3. 

      Install in this Direction

      Engage the 6 clips and 7 claws to install the rear upper console panel sub-assembly as shown in the illustration.

   4. Move the shift lever to P.

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   for UA80E:

   Click here

   for UB80E:

   Click here

   for U760E:

   Click here

   for U761E:

   Click here

9. INSTALL SHIFT LOCK RELEASE BUTTON COVER

   for UA80E:

   Click here

   for UB80E:

   Click here

   for U760E:

   Click here

   for U761E:

   Click here

10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    
    

    1. Connect each connector.

    2. Engage the clamp.

    3. 

       Install in this Direction

       Engage the 7 clips to install the lower center instrument panel finish panel as shown in the illustration.

11. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH

    
    

    1. 

       Install in this Direction

       Engage the 2 guides, claw and clip to install the instrument panel finish plate garnish as shown in the illustration.

12. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    
    

    1. 

       Install in this Direction

       Engage the 11 clips to install the No. 2 instrument panel garnish sub-assembly as shown in the illustration.

13. INSTALL NO. 1 METER HOOD CLUSTER

    
    

    1. Connect the connector.

    2. 

       Install in this Direction

       Engage the 3 guides and 7 clips to install the No. 1 meter hood cluster as shown in the illustration.