SEAT BELT WARNING SYSTEM(w/o Occupant Classification System) OPERATION CHECK

INSPECT DRIVER SIDE SEAT BELT WARNING LIGHT (for Middle East)

1. Turn the ignition switch to ON.

2. When the driver side seat belt is not fastened, check that the front seat belt warning light on the combination meter assembly blinks for 6 seconds.

3. After 1.8 seconds, check that the front seat belt warning light on the combination meter assembly changes from blinking to illuminated.

4. Lift up the vehicle using a swing arm type lift.

   Click here

5. Start the engine.

6. When the driver side seat belt is not fastened, the shift lever is in any position other than P* and the parking brake is released for 30 seconds or more, check that the front seat belt warning light on the combination meter assembly blinks.

   *: except Manual Transaxle

7. When the driver side seat belt is not fastened and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that the front seat belt warning light on the combination meter assembly blinks.

   After 59.6 seconds, check that the front seat belt warning light on the combination meter assembly changes from blinking to illuminated.

8. Starting from (f) with the front seat belt warning light on the combination meter assembly blinking, when the shift lever is moved to P, check that the front seat belt warning light on the combination meter assembly changes from blinking to illuminated.

9. Starting from (f) with the front seat belt warning light on the combination meter assembly blinking, when the parking brake is applied, check that the front seat belt warning light on the combination meter assembly changes from blinking to illuminated.

10. Starting from (f) with the front seat belt warning light on the combination meter assembly blinking, when the driver side seat belt is fastened, check that the front seat belt warning light on the combination meter assembly turns off.

INSPECT DRIVER SIDE SEAT BELT WARNING LIGHT (for General)

1. Turn the ignition switch to ON.

2. When the driver side seat belt is not fastened, check that the front seat belt warning light on the combination meter assembly blinks.

3. Lift up the vehicle using a swing arm type lift.

   Click here

4. Start the engine.

5. When the driver side seat belt is not fastened and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that the front seat belt warning light on the combination meter assembly blinks at an interval of 1.2 second for 30 seconds.

   After that, check that the front seat belt warning light on the combination meter assembly blinks at an interval of 0.4 second.

6. When the driver side seat belt is fastened, check that the front seat belt warning light on the combination meter assembly turns off.

INSPECT FRONT PASSENGER SIDE SEAT BELT WARNING LIGHT (for Middle East)

1. Place a weight of 20 kg (44.0 lb) on the front passenger seat.

   Note:

   Place the weight on the seat cushion and allow it to come into contact with the seatback.

2. Turn the ignition switch to ON.

3. Fasten the driver side seat belt.

4. When the front passenger side seat belt is not fastened with the front passenger seat occupied, check that the front seat belt warning light on the combination meter assembly blinks for 6 seconds.

   After 1.8 seconds, check that the front seat belt warning light on the combination meter assembly changes from blinking to illuminated.

5. Lift up the vehicle using a swing arm type lift.

   Click here

6. Start the engine.

7. When the front passenger side seat belt is not fastened, the shift lever is in any position other than P* and the parking brake is released for 30 seconds or more, check that the front seat belt warning light on the combination meter assembly blinks.

   *: except Manual Transaxle

8. When the front passenger side seat belt is not fastened and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that the front seat belt warning light on the combination meter assembly blinks.

   After 59.6 seconds, check that the front seat belt warning light on the combination meter assembly changes from blinking to illuminated.

9. Starting from (g) with the front seat belt warning light on the combination meter assembly blinking, when the shift lever is moved to P*, check that the front seat belt warning light on the combination meter assembly changes from blinking to illuminated.

   *: except Manual Transaxle

10. Starting from (g) with the front seat belt warning light on the combination meter assembly blinking, the front passenger side seat belt not fastened and the weight on the front passenger seat, check that the front seat belt warning light on the combination meter assembly turns off when the weight is removed from the front passenger seat.

11. Starting from (g) with the front seat belt warning light on the combination meter assembly blinking, when the front passenger side seat belt is fastened, check that the front seat belt warning light on the combination meter assembly turns off.

INSPECT FRONT PASSENGER SIDE SEAT BELT WARNING LIGHT (for General)

1. Turn the ignition switch to ON.

2. Place a weight of 20 kg (44.0 lb) on the front passenger seat.

   Note:

   Place the weight on the seat cushion and do not allow it to come into contact with the seatback.

3. Fasten the driver side seat belt.

4. When the front passenger side seat belt is not fastened, check that the front seat belt warning light on the combination meter assembly blinks.

5. Lift up the vehicle using a swing arm type lift.

   Click here

6. Start the engine.

7. When the front passenger side seat is occupied, the front passenger side seat belt is not fastened and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that the front seat belt warning light on the combination meter assembly blinks at an interval of 1.2 second for 30 seconds.

   After that, check that the front seat belt warning light on the combination meter assembly blinks at an interval of 0.4 second

8. When the front passenger side seat belt is fastened, check that the front seat belt warning light on the combination meter assembly turns off.

INSPECT REAR SEAT BELT WARNING LIGHT (w/ Rear Seat Belt Warning System)

1. Turn the ignition switch to ON.

2. When a rear door is opened and closed (the rear door courtesy light switch turns on and off), check that the rear seat belt warning light in the telltale light assembly turns on.

3. When a rear door is opened and closed (the rear door courtesy light switch turns on and off) and a rear seat belt is fastened or unfastened, check that the rear seat belt warning light in the telltale light assembly changes to inform the driver of the current condition of the rear seat belts.

INSPECT SEAT BELT WARNING BUZZER (for Middle East)

1. Place a weight of 20 kg (44.0 lb) on the front passenger seat.

   Note:

   Place the weight on the seat cushion and do not allow it to come into contact with the seatback.

2. After turning the ignition switch to ON, if the driver side seat belt is not fastened within 1.8 seconds, check that the seat belt warning buzzer in the combination meter assembly sounds at 1.2 second intervals for 6 seconds.

3. Lift up the vehicle using a swing arm type lift.

   Click here

4. Start the engine.

5. When the driver or front passenger side seat belt is not fastened and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that the seat belt warning buzzer in the combination meter assembly sounds once.

6. When 30 seconds have passed after the buzzer sounds, check that the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 second for 9.6 seconds.

7. After the seat belt warning buzzer has been sounding for 9.6 seconds at an interval of 1.2 second, check that the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 second for 20 seconds.

8. Check that the seat belt warning buzzer in the combination meter assembly stops 29.6 seconds after it started sounding at an interval of 1.2 second.

9. After the seat belt warning buzzer in the combination meter assembly stops, the ignition switch is turned off and the engine is restarted, check that the buzzer sounds once again and then sounds according to the appropriate pattern when the vehicle is driven at 20 km/h (12 mph) or more with the driver or front passenger side seat belt not fastened.

10. After the seat belt warning buzzer in the combination meter assembly stops and the vehicle is driven at 20 km/h (12 mph) or more with the driver side or front passenger side seat belt fastened, when the driver or front passenger side seat belt is unfastened, check that the buzzer sounds once again and then sounds according to the appropriate pattern.

11. After the seat belt warning buzzer in the combination meter assembly stops sounding and the shift lever is moved to R and then back to D, when the vehicle is driven at 20 km/h (12 mph) or more with the driver side or front passenger side seat belt not fastened, check that the buzzer sounds once again and then sounds according to the appropriate pattern.*

    *: except Manual Transaxle

12. After the seat belt warning buzzer in the combination meter assembly stops sounding and the shift lever is moved to reverse gear and then back to 1st gear, when the vehicle is driven at 20 km/h (12 mph) or more with the driver side or front passenger side seat belt not fastened, check that the buzzer sounds once again and then sounds according to the appropriate pattern.*

    *: except Manual Transaxle

INSPECT SEAT BELT WARNING BUZZER (for General)

1. Place a weight of 20 kg (44.0 lb) on the front passenger seat.

   Note:

   Place the weight on the seat cushion and do not allow it to come into contact with the seatback.

2. Lift up the vehicle using a swing arm type lift.

   Click here

3. Start the engine.

4. w/ Rear Seat Belt Warning System:

   Open and close a rear door (the rear door courtesy light switch turns on and off).

5. Check that the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 second for 30 seconds.

6. After the seat belt warning buzzer has been sounding for 30 seconds at an interval of 1.2 second, check that the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 second for 90 seconds.

7. Check that the seat belt warning buzzer in the combination meter assembly stops 2 minutes after it started sounding at an interval of 1.2 second. Check that the seat belt warning buzzer in the combination meter assembly stops 2 minutes after it started sounding at an interval of 1.2 second.

8. After the buzzer has stopped, turn the ignition switch off and then start the engine again. Drive the vehicle at approximately 20 km/h (12 mph) or more while the driver side seat belt, front passenger side seat belt or a rear seat belt* is not fastened, and check that the buzzer sounds again.

   *: w/ Rear Seat Belt Warning System

9. w/ Rear Seat Belt Warning System:

   After the buzzer stops, open and close a rear door.

   Then drive the vehicle at approximately 20 km/h (12.5 mph) or more while a rear seat belt is not fastened and check that the buzzer sounds again.

10. After the buzzer has stopped, fasten the driver and front passenger side seat belt. Drive the vehicle at approximately 20 km/h (12 mph) or more and unfasten the driver side seat belt, front passenger side seat belt or rear seat belt* and check that the buzzer sounds again.

    *: w/ Rear Seat Belt Warning System

11. After the buzzer has stopped, stop the vehicle, move the shift lever to R, and then move it to D. Drive the vehicle at approximately 20 km/h (12 mph) or more, and check that the buzzer sounds again.*

    *: except Manual Transaxle

12. After the buzzer has stopped, stop the vehicle, move the shift lever to reverse gear, and then move it to 1st gear. Drive the vehicle at approximately 20 km/h (12 mph) or more, and check that the buzzer sounds again.*

    *: for Manual Transaxle