REAR SEAT OUTER BELT ASSEMBLY INSTALLATION
CAUTION / NOTICE / HINT
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL REAR SEAT BELT RETRACTOR COVER LH
Attach the claw to install the rear seat belt retractor cover LH.
INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
-
*1
Bolt (A)
*2
Bolt (B)
Align the 2 claws with the seat belt positioning holes, and install the retractor of the rear No. 1 seat outer belt assembly LH with the 2 bolts as shown in the illustration.
for bolt A
8.5 N*m
87 kgf*cm
75 in.*lbf
for bolt B
42 N*m
428 kgf*cm
31 ft.*lbf
-
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Connect the shoulder anchor of the rear No. 1 seat outer belt assembly LH with the bolt.
42 N*m
428 kgf*cm
31 ft.*lbf
Check that the rear No. 1 seat outer belt assembly LH is not twisted.
Connect the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.
42 N*m
428 kgf*cm
31 ft.*lbf
Check that the rear No. 1 seat outer belt assembly LH is not twisted.
INSTALL SEAT BELT ANCHOR COVER CAP
Attach the guide and 2 claws to install the seat belt anchor cover cap.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL REAR SEAT ASSEMBLY LH
INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE WITH REAR NO. 1 FLOOR BOARD
w/o Spare Tire, for Compact Spare Tire:
w/ Full Size Spare Tire:
INSTALL REAR DECK TRIM COVER (w/ Full Size Spare Tire)
INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Tire)
INSTALL DECK FLOOR BOX LH
INSTALL DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Tire)
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)