REAR VIEW MONITOR SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    5. Check for DTCs Click here.

      Note

      The navigation receiver assembly*1 or radio and display receiver assembly*2*3 outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the rear view monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

      System Proceed to
      Navigation System (for Navigation Receiver Type)*1

      Click here

      Audio and Visual System*2

      Click here

      Navigation System (for Radio and Display Type)*3

      Click here


      • *1: for Navigation Receiver Type

      • *2: for Radio and Display Type (w/o Navigation System)

      • *3: for Radio and Display Type (w/ Navigation System)

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    5. Clear the DTCs.