LIGHTING SYSTEM


  1. FUNCTION


    1. The illuminated entry system has the following functions:

      Function Outline Lights that Operate
      Actuation Area-linked*1

      • When a registered key enters any actuation area around the doors, the lights that operate turn on.

      • When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.

      • Engine Switch Illumination

      • Front Room Light*1

      • Rear Dome Light*1

      • Outside Handle Illumination*2
      Door Lock/Unlock-linked

      • When any door is unlocked, the lights that operate turn on.

      • When all doors are locked, the lights that operate turn off.

      • Engine Switch Illumination

      • Front Room Light*1

      • Rear Dome Light*1

      • No. 1 Interior Illumination Light Assembly LH and RH

      • Remote Touch Illumination*3
      Door Open/Close-linked

      • When any door is opened, the lights that operate turn on.

      • When all doors are closed, the lights that operate turn off.

      • Engine Switch Illumination

      • Front Room Light*1

      • Rear Dome Light*1

      • No. 1 Interior Illumination Light Assembly LH and RH

      • Remote Touch Illumination*3

      • Outside Handle Illumination*2
      Engine Switch-linked

      • When the engine switch is turned from on (ACC) or on (IG) to off, the lights that operate turn on.

      • When the engine switch is turned from off to on (ACC) or on (IG), the lights that operate turn off.

      • Engine Switch Illumination

      • Front Room Light*1

      • Rear Dome Light*1

      • No. 1 Interior Illumination Light Assembly LH and RH

      • Remote Touch Illumination*3
      Delay

      When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:


      • An actuation area-linked function is used.*2

      • The door unlock-linked function is active.

      • Any door is opened and then all doors are closed when the engine switch is off.

      • Engine Switch Illumination

      • Front Room Light*1

      • Rear Dome Light*1

      • No. 1 Interior Illumination Light Assembly LH and RH

      When approximately 15 seconds elapse after either of the following conditions is met, the lights that operate turn off:


      • The door unlock-linked function is active.

      • Any door is opened and then all doors are closed when the engine switch is off.

      • Engine Switch Illumination

      • Front Room Light*1

      • Rear Dome Light*1

      • No. 1 Interior Illumination Light Assembly LH and RH

      • Remote Touch Illumination*3

      • Outside Handle Illumination*2
      Battery Saving

      • When 20 minutes elapse after the engine switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.

      • Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


        • The engine switch is turned on (ACC) or on (IG).

      • Front Room Light

      • Map Light

      • Rear Dome Light

      • No. 1 Interior Illumination Light Assembly LH and RH

      • Vanity Light Assembly (LH and RH)

      • Deck Light LH and RH

      Tech Tips

      *1: When the front room light and the rear dome light are during illuminate, the function that can be turned off by the operation of the dome switch has been provided .

      *2: Models with entry function

      *3: Models with navigation system or destination package for Korea