REPAIR INSTRUCTION INITIALIZATION


  1. PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL

    Procedures Necessary when Cable is Disconnected/Reconnected to Battery Terminal
    Necessary Procedure Effect or Inoperative Function when Necessary Procedure is not Performed See page
    Circling calibration Compass

    Click here

    Power window regulator motor initialization (for Driver Side, w/ Jam Protection)

    • Jam protection function

    • Power window control system

    Click here

  2. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED

    Procedures Necessary when ECU or Other Parts are Replaced
    Replacement Part Necessary Procedure Effect or Inoperative Function when Necessary Procedure is not Performed See page
    ECM (for 1KD-FTV, w/ DPF)

    • Learning values save

    • Learning values write

    		 Engine starting

    Click here

    Engine assembly (for 1KD-FTV, w/ DPF)

    • Clear crank time compensation data

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    Crankshaft position sensor plate (for 1KD-FTV, w/ DPF) Clear crank time compensation data Crank time compensation data compensation amount is same as before replacement, affecting crank time compensation data
    Air Fuel ratio sensor (for 1KD-FTV, w/ DPF) Clear A/F sensor compensation data EGR volume is affected
    Fuel supply pump (for 1KD-FTV, w/ DPF) Supply pump initialization Engine startability
    DPF catalyst (for 1KD-FTV, w/ DPF)

    • Clear DPF thermal deterioration data

    • Learning values write

    		 Even if catalytic converter is replaced with new one, catalyst record of DPF thermal deterioration stored in ECM is same as before replacement
    Fuel injector (for 1KD-FTV, w/ DPF)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    Automatic transmission assembly, engine assembly or ECM (for 1KD-FTV, w/ DPF) Automatic Transmission Initialization Large shift shock
    ECM (for 1KD-FTV, w/ EGR Cooler)

    • Learning values save

    • Learning values write

    		 Engine starting

    Click here

    Engine assembly (for 1KD-FTV, w/ EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    Fuel supply pump (for 1KD-FTV, w/ EGR Cooler) Supply pump initialization Engine starting
    Fuel injector (for 1KD-FTV, w/ EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    ECM (for 1KD-FTV, w/o EGR Cooler)

    • Learning values save

    • Learning values write

    		 Engine starting

    Click here

    Engine assembly (for 1KD-FTV, w/o EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    Fuel supply pump (for 1KD-FTV, w/o EGR Cooler) Supply pump initialization Engine startability
    Fuel injector (for 1KD-FTV, w/o EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    ECM (for 2KD-FTV, w/ DPF)

    • Learning values save

    • Learning values write

    		 Engine starting

    Click here

    Engine assembly (for 2KD-FTV, w/ DPF)

    • Clear crank time compensation data

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    Crankshaft position sensor plate (for 2KD-FTV, w/ DPF) Clear crank time compensation data Crank time compensation data compensation amount is same as before replacement, affecting crank time compensation data
    Air Fuel ratio sensor (for 2KD-FTV, w/ DPF) Clear A/F sensor compensation data EGR volume is affected
    Fuel supply pump (for 2KD-FTV, w/ DPF) Supply pump initialization Engine startability
    DPF catalyst (for 2KD-FTV, w/ DPF)

    • Clear DPF thermal deterioration data

    • Learning values write

    		 Even if catalytic converter is replaced with new one, catalyst record of DPF thermal deterioration stored in ECM is same as before replacement
    Fuel injector (for 2KD-FTV, w/ DPF)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    ECM (for 2KD-FTV, w/ EGR Cooler)

    • Learning values save

    • Learning values write

    		 Engine starting

    Click here

    Engine assembly (for 2KD-FTV, w/ EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    Fuel supply pump (for 2KD-FTV, w/ EGR Cooler) Supply pump initialization Engine startability
    Fuel injector (for 2KD-FTV, w/ EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    ECM (for 2KD-FTV, w/o EGR Cooler)

    • Learning values save

    • Learning values write

    		 Engine starting

    Click here

    Engine assembly (for 2KD-FTV, w/o EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting
    Fuel supply pump (for 2KD-FTV, w/o EGR Cooler) Supply pump initialization Engine startability
    Fuel injector (for 2KD-FTV, w/o EGR Cooler)

    • Injector compensation code registration

    • Pilot quantity learning

    		 Engine starting

    for A750E


    • Automatic transmission assembly

    • ECM

    • Engine assembly (for 1GR-FE)

    		 Reset memory Large shift shock

    Click here

    for A750F


    • Automatic transmission assembly (for 1KD-FTV)

    • Valve body assembly (for 1KD-FTV)

    • Any of the shift solenoid valve (for 1KD-FTV)

    		 Reset memory Large shift shock

    Click here

    for A750F


    • Automatic transmission assembly (for 1GR-FE)

    • ECM (for 1GR-FE)

    • Engine assembly (for 1GR-FE)

    		 Reset memory Large shift shock

    Click here

    Skid control ECU (Brake actuator assembly) Yaw rate and acceleration sensor zero point calibration VSC

    Click here


    • Yaw rate and acceleration sensor

    • Front wheel alignment adjustment

    • Clearing zero point calibration data

    • Yaw rate and acceleration sensor zero point calibration

    		 VSC

    for Built-in Type Door Control Receiver


    • Theft warning ECU assembly

    • Key

    		 Recognition code registration Wireless door lock control system

    Click here

    for Non-built-in Type Door Control Receiver


    • Door control receiver assembly

    • Key

    		 Recognition code registration Wireless door lock control system

    Click here


    • Transponder key ECU assembly

    • ECM

    • Key

    		 Code registration Engine starting Refer to the Service Bulletin for the registration procedure.
    Timing belt (for 1KD-FTV, 2KD-FTV, 5LE) Mode reset operation

    • Does not illuminate when replacement is necessary

    • Illuminates when replacement is not necessary

    Click here

    for Driver Side, w/ Jam Protection


    • Front door power window regulator sub-assembly (w/ Motor)

    • Front power window regulator motor assembly (w/o Motor)

    • Front door power window regulator sub-assembly (w/o Motor)

    • Power window master switch

    		 Motor initialization

    • Jam protection function

    • Power window control system

    Click here