REAR SPEED SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR WHEEL

  3. REMOVE REAR SPEED SENSOR


    1. Disconnect the sensor connector.

      A01DZIJ

    2. Detach the clamp.

    3. Remove the 2 bolts and 2 harness clamps.

    4. Remove the bolt and speed sensor LH.

    5. Disconnect the sensor connector.

      A01DXPR

    6. Detach the connector.

    7. Detach the 2 clamps.

    8. Remove the bolt and harness clamp.

    9. Remove the bolt and speed sensor RH.