THEFT DETERRENT SYSTEM PRECAUTION
PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
DOOR CONTROL RECEIVER EXPRESSIONS
The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
Vehicle Specification
Part Name in Manual
Actual Part Name
for 12 Pin Type
Door control receiver
Door control and tire pressure monitoring system receiver assembly
except 12 Pin Type
Door control receiver
Door control receiver
IGNITION SWITCH EXPRESSION
Tip:The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ignition Switch (Position)
Engine Switch (Condition)
Ignition Switch off
LOCK
Off (LOCK)
Ignition Switch ACC
ACC
On (ACC)
Ignition Switch ON
ON
On (IG)
Engine Start
START
On (Start)
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
When disconnecting the cable from the negative (-) battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected