REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. Attach the claw.

    2. Attach the guide to install the rear combination light socket and wire sub-assembly LH.

  2. INSTALL BACK UP LIGHT BULB


    1. A01DZP5

      Install the back up light bulb to the rear combination light socket and wire sub-assembly LH.

    2. Turn the rear combination light socket and wire subassembly LH in the direction indicated by the arrow in the illustration to install it.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A01DZT0

      Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.

    2. Turn the rear combination light socket and wire subassembly LH in the direction indicated by the arrow in the illustration to install it.

  4. INSTALL TAIL AND STOP LIGHT BULB


    1. A01E0PC

      Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly LH.

    2. Turn the rear combination light socket and wire subassembly LH in the direction indicated by the arrow in the illustration to install it.

  5. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Connect the connector.

    2. Attach the 2 clips to install the rear combination light assembly LH.

    3. Install the 2 bolts to the rear combination light assembly LH.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }