2AD-FTV LUBRICATION SERVICE DATA

Table 1. ENGINE OIL PRESSURE
Condition	Specified Condition
Idle	29 kPa (0.3 kgf/cm², 4.2 psi) or higher
4500 rpm	245 kPa (2.5 kgf/cm², 36 psi) or higher

Table 2. STANDARD OIL GRADE
	Oil Grade	Oil Viscosity (SAE)
for CCo Diesel fuel that contains between 50 ppm and 500 ppm of sulfur	G-DLD1, ACEA B1, API CF-4 or CF (You may also use API CE or CD)	- 5W-30 - 10W-30 - 15W-40 - 20W-50
for CCo Diesel fuel that contains 50 ppm or less of sulfur	ACEA C2, ACEA B1, API CF-4 or CF	- 0W-30 - 5W-30 - 10W-30 - 15W-40 - 20W-50
for DPF	ACEA C2	- 0W-30 - 5W-30

Table 3. STANDARD CAPACITY
Item	Specified Condition
Drain and refill without oil filter change	5.5 liters (5.8 US qts, 4.8 Imp.qts)
Drain and refill with oil filter change	5.9 liters (6.2 US qts, 5.2 Imp.qts)
Dry fill	6.3 liters (6.7 US qts, 5.5 Imp.qts)

Table 4. OIL PRESSURE SWITCH
Tester Connection	Condition	Specified Condition
1 - Body ground	Engine stopped	Below 1 Ω
1 - Body ground	Engine idling	10 kΩ or higher

Table 5. OIL LEVEL SENSOR
Tester Connection	Switch Condition	Specified Condition
1 - 2	On	Below 0.5 Ω
1 - 2	Off	1 MΩ or higher

Table 6. OIL PUMP
Driven rotor and Drive rotor	Standard tip clearance	0.180 to 0.300 mm (0.00709 to 0.0118 in.)
	Maximum tip clearance	0.300 mm (0.0118 in.)
	Standard body clearance	0.175 to 0.250 mm (0.00689 to 0.00984 in.)
	Maximum body clearance	0.250 mm (0.00984 in.)
	Standard side clearance	0.030 to 0.090 mm (0.00118 to 0.00354 in.)
	Maximum side clearance	0.090 mm (0.00354 in.)