REAR SEAT OUTER BELT ASSEMBLY REMOVAL
CAUTION / NOTICE / HINT
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)
REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
REMOVE DECK BOARD ASSEMBLY (for Compact Spare Tire)
REMOVE DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)
REMOVE DECK FLOOR BOX LH
REMOVE REAR NO. 3 FLOOR BOARD
REMOVE REAR NO. 2 FLOOR BOARD
Tip:Use the same procedure described for the rear No. 3 floor board side.
REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)
REMOVE REAR DECK TRIM COVER (w/ Full Size Spare Tire)
REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Compact Spare Tire)
REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Full Size Spare Tire)
REMOVE REAR SEAT ASSEMBLY LH
REMOVE REAR DOOR SCUFF PLATE LH
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
REMOVE SEAT BELT ANCHOR COVER CAP
Using a screwdriver, detach the 2 claws and guide to remove the seat belt anchor cover cap.
Tip:Tape the screwdriver tip before use.
DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
-
Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly LH.
-
Remove the bolt and shoulder anchor of the rear No. 1 seat outer belt assembly LH.
-
REMOVE DECK TRIM SERVICE HOLE COVER
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH
REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
-
Remove the 2 bolts.
Detach the 2 claws to remove the rear No. 1 seat outer belt assembly LH.
-
REMOVE REAR SEAT BELT RETRACTOR COVER LH
-
Detach the claw to remove the rear seat belt retractor cover LH.
-