AIRBAG SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

  • Use the following procedure to troubleshoot the airbag system.

  • *: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    1. Confirm problem symptoms.

      Click hereClick hereClick hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  3. CHECK CAN COMMUNICATION SYSTEM*

    1. Using the GTS, check if the CAN communication system is functioning normally.

      OK

      CAN communication system is functioning normally.

      Tip:

      • Refer to CAN Bus Check for the CAN communication system.

        Click hereClick hereClick hereClick here

      • The airbag sensor assembly is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there are no malfunctions in the CAN communication system.

    Result

    Proceed to

    OK

    NG
    NG

    GO TO CAN COMMUNICATION SYSTEM

    Click here

    OK

  4. SRS WARNING LIGHT CHECK

    1. Proceed to Diagnosis System.

      Click hereClick hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  5. CHECK FOR DTC*

    1. Proceed to DTC Check / Clear.

      Click here

      Body Electrical > SRS Airbag > Trouble Codes

    Result

    Result

    Proceed to

    DTCs are output.

    A

    DTCs are not output.

    B
    B

    SYMPTOM SIMULATIONClick here

    A

  6. DIAGNOSTIC TROUBLE CODE CHART

    1. Proceed to Diagnostic Trouble Code Chart.

      Click hereClick hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  7. CIRCUIT INSPECTION*

    Result

    Proceed to

    NEXT
    NEXT

  8. IDENTIFICATION OF PROBLEM

    Result

    Proceed to

    NEXT
    NEXT

  9. REPAIR OR REPLACEMENT

    Result

    Proceed to

    NEXT
    NEXT

  10. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END

  11. SYMPTOM SIMULATION

    1. Proceed to How to Proceed with Troubleshooting.

      Click hereClick hereClick hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  12. PROBLEM SYMPTOMS TABLE

    1. Proceed to Problem Symptoms Table.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  13. CIRCUIT INSPECTION*

    Result

    Proceed to

    NEXT
    NEXT

  14. IDENTIFICATION OF PROBLEM

    Result

    Proceed to

    NEXT
    NEXT

  15. REPAIR OR REPLACEMENT

    Result

    Proceed to

    NEXT
    NEXT

  16. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END