REAR CENTER SEAT ASSEMBLY(for Rear No. 1 Seat) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. REMOVE INNER SEAT TRACK BRACKET COVER LH

    1. Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. B220737

      Detach the 2 claws and 3 guides, and then remove the cover.

  2. REMOVE INNER SEAT TRACK BRACKET COVER RH

    Tip:

    Use the same procedures described for the LH side.

  3. REMOVE REAR SEAT INNER TRACK BRACKET COVER LH

    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. B220739

      Detach the 3 claws and guide, and then remove the cover.

  4. REMOVE REAR SEAT INNER TRACK BRACKET COVER RH

    Tip:

    Use the same procedures described for the LH side.

  5. REMOVE REAR CENTER SEAT ASSEMBLY

    1. B220740

      Detach the 2 claws and wire harness clamp.

    2. Disconnect the connector.

    3. Lift up the seat track adjusting handle and move the seat to the foremost position.

    4. B223981

      Remove the 2 bolts.

    5. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    6. B220910

      Operate the rear center back lock control lever and fold down the seatback.

    7. Remove the 2 bolts.

    8. B224708

      Operate the rear back lock control lever RH and fold down the rear No. 1 seatback LH.

    9. B224712

      Remove the rear center seat assembly from the vehicle.

      Note:

      Be careful not to damage the vehicle body or rear No. 1 seat assembly.