NAME PLATE ATTACHMENT POSITION


  1. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

    Tech Tips

    Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.

  2. Wipe off the remaining double-sided tape using a clean cloth or equivalent.

    Note

    If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.

  3. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

    Tech Tips

    The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.

B006W9OC01
*1 LUGGAGE COMPARTMENT DOOR EMBLEM *2 NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
*3 NO. 3 LUGGAGE COMPARTMENT DOOR PLATE *4 NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
● Non-reusable part - -

  1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM

    Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.

    B006W9R

  2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    Engage the 10 pins and install the No. 2 luggage compartment door name plate as shown in the illustration.

    B006WA4

  3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

    Install the No. 3 luggage compartment door plate as shown in the illustration.

    B006W9PC01
    *a Profile of Luggage Compartment Door Panel - -

    Tech Tips

    Press the No. 3 luggage compartment door plate firmly to install it.

  4. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE

    Install the No. 7 luggage compartment door name plate as shown in the illustration.

    B006W9IC01
    5. *a Profile of Luggage Compartment Door Panel - -

Tech Tips

Press the No. 7 luggage compartment door name plate firmly to install it.