GENERATOR (for DENSO Made) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE AIR CLEANER ASSEMBLY


    1. w/ Mass Air Flow Meter:


      1. Disconnect the mass air flow meter connector and detach the wire harness clamp.

        A01E03XE01
        Text in Illustration
        *A w/ Intercooler *B w/o Intercooler

      2. Loosen the hose clamp, and then remove the air cleaner hose from the turbocharger.

      3. w/o Intercooler:

        Disconnect the ventilation hose and remove the 2 bolts and air cleaner.

    2. w/o Mass Air Flow Meter:


      1. A01DV6E

        Remove the clamp and disconnect the intake air temperature sensor connector.

      2. Loosen the clamp of the turbocharger.

      3. Slide the clamp and disconnect the ventilation hose.

      4. Remove the 2 bolts and air cleaner.

  3. REMOVE FAN AND GENERATOR V BELT


    1. A01E0B4E01

      Using the pulley set bolt of the tensioner, rotate the tensioner pulley clockwise to loosen the belt's tension. Then remove the V belt.

  4. REMOVE GENERATOR ASSEMBLY

    A01DXLF

    1. Remove the nut and generator wire.

    2. Disconnect the generator connector.

    3. Remove the 2 bolts and generator.