STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

   Click here

3. REMOVE ECO RUN CANCEL SWITCH ASSEMBLY (w/o Pre-crash Safety System)

   1. 

      Disengage the 2 claws to remove the eco run cancel switch assembly from the lower instrument panel finish panel.

4. REMOVE ECO RUN CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY) (w/ Pre-crash Safety System)

   1. 

      Disengage the 2 claws to remove the eco run cancel switch assembly (combination switch assembly) from the lower instrument panel finish panel.