PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click hereClick hereClick here

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    1. Move the shift lever to N.

    2. C202510

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    1. Disconnect the park/neutral position switch connector.

    2. C168295

      Remove the nut, washer and control shaft lever.

    3. C169000C02

      *1

      Lock Plate

      Using a screwdriver, bend the tabs of the lock plate.

    4. Remove the lock nut and lock plate.

    5. C169001

      Remove the 2 bolts and pull out the park/neutral position switch to remove it.