FRONT STABILIZER BAR INSTALLATION


  1. INSTALL FRONT STABILIZER BAR


    1. Install the stabilizer bar front to the vehicle body.

  2. INSTALL FRONT NO. 1 STABILIZER BAR BUSH

    A01E1E0E02

    1. Install the 2 bushes.

      Tech Tips


      • Install each bush to the outer side of the bush stopper on the stabilizer bar.


      • Install each bush with the slit of the bush facing the vehicle front side.

  3. INSTALL FRONT STABILIZER BRACKET

    A01DZG4E02

    1. Install the 2 brackets with the 4 bolts.

      Torque:
      48 N*m  { 489 kgf*cm, 35 ft.*lbf }

      Tech Tips

      2WD and 4WD and Pre-runner vehicle stabilizer brackets are imprinted with arrows. Only the 4WD and Pre-runner brackets' arrows must point toward the front of the vehicle.

  4. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

    A01E263E02

    1. 2WD:


      1. Install the front stabilizer link assembly LH with a new nut (upper side) and the nut (lower side).

        Torque:
        27 N*m  { 316 kgf*cm, 23 ft.*lbf, for upper side }
        78 N*m  { 795 kgf*cm, 58 ft.*lbf, for lower side }

        Tech Tips

        If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.

    2. 4WD and Pre-runner:


      1. Install the front stabilizer link assembly LH with the 2 nuts.

        Torque:
        70 N*m  { 714 kgf*cm, 52 ft.*lbf }

        Tech Tips

        If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.

  5. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  6. INSTALL FRONT WHEEL


    1. Install the front wheel.

      Torque:
      2WD
      152 N*m  { 1,550 kgf*cm, 112 ft.*lbf, for steel wheel }
      121 N*m  { 1,234 kgf*cm, 89 ft.*lbf, for aluminum wheel }
      4WD and Pre-runner
      105 N*m  { 1,071 kgf*cm, 77 ft.*lbf }