DYNAMIC TORQUE CONTROL 4WD/AWD SYSTEM 4WD Warning Light does not Come ON
| DTC Code | DTC Name |
|---|---|
| 4WD Warning Light does not Come ON |
DESCRIPTION
Refer to "4WD Warning Light Remains ON".
WIRING DIAGRAM
Refer to "4WD Warning Light Remains ON".
CAUTION / NOTICE / HINT
PROCEDURE
CHECK CAN COMMUNICATION SYSTEM
Check if CAN communication system DTCs are output.
for LHD with Central Gateway ECU:Click hereClick here
for RHD with Central Gateway ECU:Click hereClick hereClick here
for LHD without Central Gateway ECU:Click hereClick here
for RHD without Central Gateway ECU:Click hereClick here
Result
Result
Proceed to
CAN communication system DTC is not output
A
CAN communication system DTC is output (for LHD with Central Gateway ECU)
B
CAN communication system DTC is output (for RHD with Central Gateway ECU)
C
CAN communication system DTC is output (for LHD without Central Gateway ECU)
D
CAN communication system DTC is output (for RHD without Central Gateway ECU)
E
Tip:When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.
INSPECT 4WD/AWD WARNING LIGHT
Disconnect the G86 4WD ECU assembly connector.
Turn the ignition switch to ON.
for Segment Display Type:
Check that the 4WD/AWD warning light comes on.
OK
4WD/AWD warning light comes on.
for TFT Display Type:
Check that the 4WD/AWD warning message is displayed.
OK
The 4WD/AWD warning message is displayed.
Result
Proceed to
OK
NG