CLUTCH PEDAL SWITCH INSPECTION

PROCEDURE

  1. INSPECT CLUTCH SWITCH ASSEMBLY

    C127480C01

    *a

    6.5 to 7.5 mm (0.256 to 0.295 in.)

    1. Check the resistance between the terminals when the switch is ON and OFF.

      Standard Resistance

      Tester Connection

      Switch Position

      Specified Condition

      1-2

      ON (pushed)

      Below 1 Ω

      1-2

      OFF (not pushed)

      10 kΩ or higher

  2. INSPECT CLUTCH START SWITCH ASSEMBLY

    C127475C01

    *a

    7.65 to 8.35 mm (0.302 to 0.328 in.)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1-2

      On (pushed)

      Below 1 Ω

      1-2

      Off (not pushed)

      10 kΩ or higher

      If the result is not as specified, replace the clutch start switch assembly.