REAR SUNSHADE ASSEMBLY(for Rear Door) INSPECTION

PROCEDURE

1. INSPECT REAR CURTAIN SUB-ASSEMBLY LH

   
   
   1. 

      *a	Component without Harness Connected (Rear Curtain Sub-assembly LH)

      Inspect the rear curtain sub-assembly LH.

      Apply battery voltage and check the operation of the rear curtain sub-assembly LH.

      OK
      Tester Connection Specified Condition K22-2(SSAB) - Battery positive (+) K22-1(SSAE) - Battery negative (-) Rear curtain sub-assembly LH raises K22-1(SSAE) - Battery positive (+) K22-2(SSAB) - Battery negative (-) Rear curtain sub-assembly LH lowers

      CAUTION:

      Be careful when the rear curtain sub-assembly LH raises and lowers. Something could get caught in the rear curtain sub-assembly LH and cause an injury.

      Tech Tips

      To prevent the motor from burning out, stop operation as soon as the rear curtain sub-assembly LH is fully raised or lowered.

      If the result is not as specified, replace the rear curtain sub-assembly LH.

2. INSPECT REAR CURTAIN SUB-ASSEMBLY RH

   
   
   1. 

      *a	Component without Harness Connected (Rear Curtain Sub-assembly RH)

      Inspect the rear curtain sub-assembly RH.

      Apply battery voltage and check the operation of the rear curtain sub-assembly RH.

      OK
      Tester Connection Specified Condition K8-2(SSA+) - Battery positive (+) K8-1(SSA-) - Battery negative (-) Rear curtain sub-assembly RH raises K8-1(SSA-) - Battery positive (+) K8-2(SSA+) - Battery negative (-) Rear curtain sub-assembly RH lowers

      CAUTION:

      Be careful when the rear curtain sub-assembly RH raises and lowers. Something could get caught in the rear curtain sub-assembly RH and cause an injury.

      Tech Tips

      To prevent the motor from burning out, stop operation as soon as the rear curtain sub-assembly RH is fully raised or lowered.

      If the result is not as specified, replace the rear curtain sub-assembly RH.